Download Simxperience Port Devices Driver

/ Comments off



  1. Download Simxperience Port Devices Driver Updater
  2. Download Simxperience Port Devices Driver
  3. Download Simxperience Port Devices Driver Printer
  • August 22, 2019 2.9.8

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.8

    Released

    August 22, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added several internal interfaces for particular sensors (J003).
  • January 25, 2019 2.9.6

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.6

    Released

    January 25, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added missing Tonemapping Auto property.
  • May 4, 2018 2.9.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.5

    Released

    May 4, 2018

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.
  • November 21, 2017 2.9.4

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.4

    Released

    November 21, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Repaired not working J003 mono sensor pattern fix on particular video formats.
    2. This driver version is the last that works in Windows XP.
  • January 9, 2017 2.9.3

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.3

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added a pattern fix for J003 mono sensors.
  • January 9, 2017 2.9.1

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.1

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.
  • January 15, 2016 2.8.9

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.9

    Released

    January 15, 2016

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Changed certificates so that the driver can also be installed in Vista.
  • November 9, 2015 2.8.7

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.7

    Released

    November 9, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed an error which can appear when using sharpness on older CPUs.
  • October 20, 2015 2.8.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.5

    Released

    October 20, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed a bug which can appear on LivePause call.
  • July 15, 2015 2.8.0

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.0

    Released

    July 15, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support of DFK ECU010-L34 with serial number property.
    2. Added tone mapping.
  • February 17, 2015 2.7.33

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.33

    Released

    February 17, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.
  • February 5, 2015 2.7.32

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.32

    Released

    February 5, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.
  • January 14, 2015 2.7.31

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.31

    Released

    January 14, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support for IMX236 based cameras.
    2. Support for RGB64 color formats.
    3. Several performance improvements.
  • June 6, 2014 2.7.9.1152

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.9.1152

    Released

    June 6, 2014

    Type

    ZIP

    Filesize

    2.1MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast.
    2. Added new property: Highlight reduction.
    3. Added new property: White balance temperature controls.
    4. Pixelfix for Y16 cameras now works as expected.
    5. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.
  • January 1, 2014 2.6.5.1014

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.6.5.1014

    Released

    January 1, 2014

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed missing auto-gain for DFK AFU130.
    2. Fixed focus when start value is out of auto_focus_range.
    3. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong.
    4. Fixed auto focus ROI not working for 21*UC cameras.
    5. Fixed crash on load/connect with certain cameras 22/72xUC.
    6. Fixed previous exposure settings not being loaded on reconnect.
    7. Complete reworking of internal property system.
    8. Fixed Windows XP driver load crash.
    9. Fixed drop counter to be accessible from DirectShow.
    10. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible).
    11. Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.
  • February 26, 2013 2.4.14.851

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.4.14.851

    Released

    February 26, 2013

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. WHQL certification.
Download Simxperience Port Devices Driver
  • Welcome to the NETGEAR Download Center!! To find documentation, firmware, software, or other files, enter a whole or partial Model number in the text search box.
  • Download the latest drivers, firmware, and software for your HP OfficeJet Pro 6970 All-in-One Printer series.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.
  • The driver download area could be called by any of several different names including Downloads, Software Downloads, Driver Downloads, Drivers, Drivers and Firmware, Drivers and Software, etc. If you visit a website's home page first, look for a Support area. Any driver download options will probably be located within that area.
Download Simxperience Port Devices Driver

Virtual COM Port Driver is available in the Standard and PRO editions, so you can choose the optimal set of features that is perfectly suited to your needs. Standard version Virtual Serial Port Driver is designed to provide your system with an unlimited number of virtual serial port pairs that work like real hardware COM interfaces and fully.

Simxperience-->

This topic describes the USB hardware verifier tool (USB3HWVerifierAnalyzer.exe) that is used for testing and debugging specific hardware events.

Most hardware issues manifest in ways that lead to poor end-user experience and it's often difficult to determine the exact failure. The USB hardware verifier aims at capturing hardware failures that occur in a device, port, hub, controller, or a combination of them.

Download Simxperience Port Devices Driver Updater

The USB hardware verifier can perform these tasks:

  • Capture hardware events and display information in real time.
  • Generate a trace file with information about all events.
  • Parse an existing trace file for event information.

This topic contains the following sections:

Getting the USB hardware verifier analyzer tool

The USB hardware verifier tool is included with the MUTT software package that is available for download at Tools in the MUTT software package.

The tools package contains several tools that perform stress and transfer tests (including power transitions) and SuperSpeed tests. The package also has a Readme document (available as a separate download). The document gives you a brief overview of the types of MUTT hardware. It provides step-by-step guidance about various tests you should run, and suggests topologies for controller, hub, device, and BIOS/UEFI testing.

How to capture events by using a USB hardware verifier

To capture events by using the hardware verifier, perform these steps:

Download Simxperience Port Devices Driver

  1. Start a session by running this command at an elevated command prompt.

    The tool supports these options:

    OptionDescription

    -v <VendorID>

    Logs all hardware verifier events for the specified VendorID.

    -p <ProductID>

    Logs all hardware verifier events for the specified ProductID.

    -f <ETL file>

    Parses the specified ETL file. Real-time parsing is not supported. With this option, the tool parses the file offline.

    /v output

    Displays all events to the console.

  2. Run the test scenario for which you want to capture hardware events.

    During a session, USB hardware verifier captures information about hardware events as they occur. If you want to filter events for a particular hardware, specify the VendorId and ProductId of the hardware. The tool might not capture some information (such as VID/PID) about events that occur before the device gets fully enumerated. The missing information is available in the detailed report that is generated at the end of the session (discussed next).

    Here is an example output from the hardware verifier tool:

  3. Stop the session by pressing CTRL+C.

    At the end of the session, a file named AllEvents.etl is added in the current directory. This file contains trace information about all events that were captured during the session.

    In addition to AllEvents.etl, the command window shows a report. The report includes certain information that was missed in the real-time output. The following output shows an example test report for the preceding session. The report shows all events that the USB hardware verifier encountered.

    In the preceding example report, note the Key field value for each record. The report categorizes the information by those Key values, making it easier to read. The same Key values are used in events captured in AllEvents.etl.

  4. Convert AllEvents.etl to text format by running the following command:

    In the output file, search for the previously noted Key values. The values are associated with one of these fields: fid_UcxController, fid_HubDevice, and fid_UsbDevice.

  5. Open AllEvents.etl in Netmon and select Add <field_name> to display filter to filter events by controller, hub, and device.

Download Simxperience Port Devices Driver Printer

USB hardware verifier flags

FlagIndicates that ...
DeviceHwVerifierClientInitiatedResetPipeThe client driver initiated a recovery action by resetting a particular pipe in response to I/O failures. Certain client drivers might perform error recovery in other scenarios.
DeviceHwVerifierClientInitiatedResetPortThe client driver initiated a recovery action by resetting the device in response to I/O failures. Certain client drivers might perform error recovery in other scenarios.
DeviceHwVerifierClientInitiatedCyclePortThe client driver initiated a recovery action by cycling the port. This flag causes the Plug and Play Manager to re-enumerate the device.
DeviceHwVerifierSetIsochDelayFailureA USB 3.0 device failed the SET_ISOCH_DELAY request. The device can fail the request because either the driver does not require the request information or a transient error occurred. However, the driver cannot differentiate between those reasons. This error is not captured in the report.
DeviceHwVerifierSetSelFailureA USB 3.0 device failed the SET_SEL request. The device uses the request information for Link Power Management (LPM). The device can fail the request because either the driver does not require the request information or a transient error occurred. However, the driver cannot differentiate between those reasons. This error is not captured in the report.
DeviceHwVerifierSerialNumberMismatchOnRenumerationThe device reported a different serial number during re-enumeration as opposed to the one it reported during initial enumeration. A re-enumeration can occur as a result of a reset port or system resume operation.
DeviceHwVerifierSuperSpeedDeviceWorkingAtLowerSpeedThe USB 3.0 device is operating a bus speed lower than SuperSpeed.
DeviceHwVerifierControlTransferFailureA control transfer failed to the device's default endpoint failed. The transfer can fail as a result of device or controller error. The hub logs indicate the USBD status code for the transfer failure. This flag excludes SET_SEL and SET_ISOCH_DELAY control transfers failures. Those types of requests are covered by DeviceHwVerifierSetIsochDelayFailure and DeviceHwVerifierSetSelFailure flags.
DeviceHwVerifierDescriptorValidationFailureA descriptor returned by the device does not conform to the USB specification. The hub log indicates the exact error.
DeviceHwVerifierInterfaceWakeCapabilityMismatchThe RemoteWake bit is incorrectly set in the device. USB 3.0 devices that support remote wake must also support function wake. There are two ways in which the device indicates its support for function wake. The first way is through the bmAttributes field of the configuration descriptor and the second way is in its response to the GET_STATUS request targeted to the interface. For a non-composite device, the RemoteWake bit value must match the value returned by the GET_STATUS request that is targeted to interface 0. For composite devices, the RemoteWake bit must be 1 for at least one of the functions. Otherwise, this flag indicates that the device reported contradictory values in here.
DeviceHwVerifierBusRenumerationThe device is re-enumerated on the bus. A re-enumeration can occur as a result of a reset port or system resume operation. Re-enumeration also occurs, when the device is disabled/enabled or stopped/started.
HubHwVerifierTooManyResetsA hub has gone through too many reset operations within a short period. Even though those resets were successful, the hub is not processing requests and repeated errors occur.
HubHwVerifierControlTransferFailureA control transfer targeted to the hub's default endpoint failed. The transfer can fail as a result of device or controller error. The hub logs indicate the USBD status code for the failure.
HubHwVerifierInterruptTransferFailureA data transfer targeted to the hub's interrupt endpoint failed. The transfer can fail as a result of device or controller error. The hub logs indicate the USBD status code for the failure. If the transfer failed because of the request was canceled, the failure is not captured.
HubHwVerifierNoSelectiveSuspendSupportThe RemoteWake bit is not set to 1 in the hub's configuration descriptor.
HubHwVerifierPortResetTimeoutWhile enumerating or re-enumerating a device, the port-reset operation is timing out. A port change notification is not received indicating that the port-reset is complete.
HubHwVerifierInvalidPortStatusThe port status of the target port is not valid as per the USB specification. Certain devices can cause the hub to report the invalid status.
HubHwVerifierPortLinkStateSSInactiveThe link between the target port and the downstream device is in an error state.
HubHwVerifierPortLinkStateComplianceThe link between the target port and the downstream device is in compliance mode. In some scenarios involving system sleep-resume, the compliance mode error is expected and in those cases the failure is not captured.
HubHwVerifierPortDeviceDisconnectedThe downstream device on the target port is no longer connected to the bus.
HubHwVerifierPortOverCurrentThe downstream port reported overcurrent state.
HubHwVerifierControllerOperationFailureA controller operation (such as enabling device, configuring endpoints) failed for the device that is attached to the target port. Failures from SET_ADDRESS and Reset endpoint requests are not captured.

Related topics